High Quality Powder Coating, Polyester Powder Coating, Transfer Printing Powder Coating Suppliers in China

Home > Products > RAL Color Cards > Powder Coating (Ral a)

Powder Coating (Ral a)

Basic Info

Model No.:  RAL A

Product Description

Model NO.: RAL A Appearance: Powder Level: Finish Coat Certification: ISO9001, SGS Components: Resin,Pigment,Curing Agents and Additives Expiration Date: 1 Year Trademark: SENYIDA Origin: Yangzhou, Jiangsu Color: Ral Colour Cards Main Raw Material: Epoxy Method: Spray Substrate: Metal Formation Mechanism: Non Conversion Type Ral: a Specification: SGS HS Code: 3206499000 Powder Coating were first introduced to the market in the min 1950's. The first finishes were thermoplastic, which were applied at very high film thickness and gave limited areas of application. Today most powders are thermosetting, based on either epoxy and or polyester resin systems. Powder Coatings are based on resin, pigments, curing agents and additives.

Main Categories:

Art, Anti-Static, Breathable, Flame-Retardant, High Temperature Resistant, Polyester, Pure Polyester, Pure Epoxy, Thermal Transfer.
We Provide high light (above 86%), plain glass(76-85%), matt (20-50%) and low light (below 20%) of the full-color powder coatings products. Gloss can also be controlled according to the user's requirements.


Appliance industry, lighting, steel furniture, brake pads, machines, road signs pile, auto industry, transportation equioments, air-conditioned enclosure, armrest, fences, hospital operating room, computer room, precision instruments and so on.


Carton packaging, lined with double polyethylene bag, net weight 20 kg.

Storage Requirements:

Store below 30 ° C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited. Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

Health and Safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Coating performance
Test items Inspection standards Test indicators
Impact resistance ISO6272 GB/T1732-1993 50kg/cm
Cupping test ISO1520 GB/T9753-1988 8mm
The adhesion (grid method) ISO2409 GB/T9286-1998 0
Bending ISO1519 GB/T6742-1986 2mm
Pencil Hardness ASTMD3363 GB/T6739-1996 1H-2H
Salt spray test ISO7253 GB/T1771-1991 >500 hours
Damp heat test ISO6270 GB/T1740-1979 >1000 hours
Heat resistance 110°C/24 hours(white) Good gloss retention,E≤0.3-0.4

Annotate: 1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.

2.The above coating performance may be lower as shiny and slightly lower.

Contact us if you need more details on Powder Coating. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polyester Powder CoatingTransfer Printing Powder Coating. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : RAL Color Cards

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters